Bondit Grout EP 2

Bondit Grout EP 2

Epoxy Resin Based Grout



Three Component – Low exothern epoxy Resin Grout..This is specially formulated for application of grouts where high strength, free flow and chemical resistance are required. This can be used for grouting gap width between 15 mm to 75 mm.



  • It is resistant to chemicals and resists attack by a wide range of acids,alkalies,oils etc.,
  • Gives high strength at early and final stages.
  • Has excellent flowability
  • Has got excellent dynamic load resistance, which is due to its tensile and flexible strengths. BONDIT GROUT EP2 has got very good bond strength with concrete and steel.
  • It  is designed for non-shrink.
  • It  controls very effectively Creep and it is minimised even under continuous loads


Areas of Application:

Can be used as free flow grout where mechanical properties and Chemical Resistance of High Order are Required.



It has to be applied at ambient temperature, between 5 deg c to 35 deg c whereas they can resist ambient temperature up to 45 deg c to 50 deg c. When thicker section above 75mm i.e., (gap width above 75 mm has to be grouted then



1 Kg & 3 Kg Pack


Technical Support:

Technical information and guidance regarding Bondit range of construction chemicals is available from the technical services department, Bondit Construction Chemicals Pvt. Ltd.


Bondit products undergo stringent quality checks and every reasonable precaution is taken in the manufacture of all products. Bondit continuously strives to ensure the products, recommendations, specifications & information given is reliable, correct and accurate. No specific guarantee can be assured as product performance depends not only on quality but also on many other factors which are not under our control. The customer should make his own trials to determine the compatibility of the product for his own purpose. All products are sold subject to our standard terms and conditions of sale. Specifications are subject to change without notice.