Grouts and floor hardeners are used to essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings.
Bondit Grout 900
BONDIT GROUT 900 is a specially formulated
cementitious grout which has excellent
shrinkage resistance and free flow
properties. The very high initial and ultimate
strengths ensures stable and permanent
support to the load bearing areas which
transfer both static and dynamic loads onto
it. This has unique formulation which does
not cause corrosion of machine parts, Bolts,
etc in contact with steel.
Bondit Grout 500
It is a specially formulated cementations grout which has excellent shrinkage resistance and free flow properties suitable for Machine foundations. The strength ensures stable and permanent support to the load bearing areas which transfer both static and dynamic loads onto it. This has unique formulation which does not cause corrosion of machine parts, Bolts, etc in contact with it.
Bondit Grout 700
BONDITGROUT700 is a specially formulated
cementitious grout which has excellent
shrinkage resistance and free flow
properties. The very high initial and ultimate
strengths ensures stable and permanent
support to the load bearing areas which
transfer both static and dynamic loads onto
it. This has unique formulation which does
not cause corrosion of machine parts, Bolts,
etc in contact with steel
Bondit Grout Mix
BONDIT GROUT MIX i s a unique
formulation to impart non shrink properties to cement when used for grouting purposes
Bondit Grout EP 1
BONDIT GROUT EP1 is a Two pack epoxy
resin system with distinctive properties to
suit for injecting grouting and for gap
widths of 0.25 to 10 mm
Bondit Anchor Set
BONDIT ANCHOR SET is POLYESTER
BASED Two component resin system
spec ial l y made to gi ve ex cel lent
anchorage
Bondit Grout EP 2
BONDIT GROUT EP2 is a three pack
epoxy resin based grout which is specially
formulated for application of grouts
where high strength, free flow and
chemical resistance are required. This can
be used for grouting gap width between
15mm to 75 mm. This consists of base
epoxy resin, a specially made hardener
and a filler of selected graded aggregates.
Bondit Micro Concrete
BONDIT MICRO CONCRETE is a specially
formulated cementations concrete which has
excellent shrinkage resistance and free flow
properties suitable for repairs. The strength
ensures a perfect bond between the old and
new structure. This has unique formulation
whichgives thestrengthoftheconcrete
Bondit Hard Top
BONDIT HARDTOP is a cementitious floor
topping for industrial floors which is
abrasion resistant. The unique formulation
enhances the resistance of the floors to
abras ion and gi ves hard-wearing
performance against industrial use. This
formulation is non-metallic and free from
chloride.