Description:
Specially designed to provide stronger, much more durable bonding between the blocks with superior adhesive strength. It replaces conventional cement and sand mix mortar. It is self curing and no additional water curing is required.
Advantages/Benefits:
- BONDIT BLOCK BOND has excellent High Strength, Flexible, shock & impact resistant.
- BONDIT BLOCK BOND Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
- BONDIT BLOCK BOND Better bond than conventional cement based mortar.
- BONDIT BLOCK BOND Faster to apply due to good spreadable properties.
- BONDIT BLOCK BOND Economical as quantity of mortar is less than conventional mortar.
Areas of Application:
- Fly ash bricks, Cement blocks, Hollow blocks, ACC blocks, pre-stressed concrete slabs, panels/parapet walls/jointing of cement windows and door frames/ garden boundary walls.
Precautions:
BONDIT BLOCK BOND is non-toxic, non-flammable. Use gloves while mixing and pouring BONDIT BLOCK BOND. Splashes if any should be washed with plenty of water. When it comes in contact with eyes take medical advice.
Directions For Usage:
- The surface of masonry units should be slightly wet prior to application of block bond.
- Apply a thin uniform layer of Bondit block bond, 3-4mm thick, on the clean & leveled surface of masonry units using proper trowel.
- After placing the first units apply bondit block bond of same thickness on both sides of the unit, keeping continuous checks for the line and level.
- Place the next course of masonry units on evenly jointing mortar bed in proper line & level. Each masonry unit shall be properly bedded and set in position by gently pressing with handle of trowel.
- Inside unit of the masonry unit shall be applied with mortar before the next unit is laid & pressed against it especially in case of bricks
- Clean the excess material, if any immediately. Continue the procedure for the entire masonry work.
- Do not disturb the blocks /bricks setting for first 24 hours.
Packaging:
BONDIT BLOCK BOND – 40Kgs. (bags)
Shelf Life:
One Year
Estimation:
40kg of BONDIT BLOCK BOND Approx. Add 25-30% of potable water and mix thoroughly with mechanical stirrer for uniform mixing to save time and maximum workability effectiveness.
Technical information and guidance regarding Bondit range of construction chemicals is available from the technical services department, Bondit Construction Chemicals Pvt. Ltd.
Bondit products undergo stringent quality checks and every reasonable precaution is taken in the manufacture of all products. Bondit continuously strives to ensure the products, recommendations, specifications & information given is reliable, correct and accurate. No specific guarantee can be assured as product performance depends not only on quality but also on many other factors which are not under our control. The customer should make his own trials to determine the compatibility of the product for his own purpose. All products are sold subject to our standard terms and conditions of sale. Specifications are subject to change without notice.